| FDA Status |
| Defoam FG-10 antifoam emulsion is
manufactured under high standards of purity and sanitation, and is
formulated with specially selected ingredients which, at the prescribed
level, are permitted for direct addition to food by the Federal Food and
Drug Administration or are considered "generally recognized as safe." Use of
Defoam FG-10 antifoam emulsion is permissible in most foods, in
concentrations up to 100 parts defoamer as received per million parts
foamer. Any limitations on use in standardized foods should be observed.
(See FDA Regulation 21 CFR 173.340 [formerly 121.1099] under
dimethylpolysiloxane.) |
KOSHER ACCEPTANCE |
| Defoam FG-10 antifoam emulsion is acceptable
for use in the processing of Kosher foods. |
| HOW TO USE |
| Amount Needed |
| Defoam FG-10 antifoam emulsion is effective
in concentrations as low as 10 parts per million. In testing to determine
proper concentration for a particular application, start at 25 parts
defoamer per million parts foamer. Results will indicate whether an increase
or decrease in defoamer is needed. |
| To determine the actual quantity of the
antifoam emulsion required for a batch or work period (assuming that the
concentration needed to control the foamer is known), use the addition rate
chart. |
| Diluting the Antifoam |
| Defoam FG-10 antifoam emulsion disperses
easily in aqueous systems. The emulsion can be added directly to the foamer
as supplied, requiring only agitation to disperse thoroughly. |
| For use in systems where maximum efficiency
is desired, the emulsion should be prediluted with water before being added
to the foamer. The recommended dilution procedure is as follows: |
| 1.Stir or agitate the antifoam before
removing it from the shipping container. |
| 2.Dilute the required amount of antifoam
with nine volumes of water by addin@ the water slowly to the defoamer
with continual, lowshear mixing. |
| 3.Use the diluted defoamer within eight
hours after dilution for best results. If longer storage is necessary, the
diluted material should be stirred frequently. |
| 4.Add the diluted defoamer mixture to the
foaming system. Stir or agitate to achieve complete dispersion and efficient
foam control. |
| SHIPPING LIMITATIONS |
| None. |
| STORAGE AND SHELF LIFE |
| When stored at or below 90°F (32°C), Defoam
FG-10 antifoam emulsion has a shelf life of 12 months from date of shipment. |
| PACKAGING |
| Defoam FG-10 antifoam emulsion is supplied
in 1 kg, 4 kg and 20 kg containers. All weights, net. |
| USERS PLEASE READ |
| The information and data contained herein
are believed to be accurate and I reliable; however, it is the users
responsibility to determine suitability of use. Since we cannot know all of
the uses to which its products may be put or the conditions of use, it makes
no warranties concerning the fitness or suitability of its products for a
particular use or purpose. |
| You should thoroughly test any proposed use
of our products and independently conclude satisfactory performance in your
application. Likewise, if the manner in which our products are used requires
governmental approval or clearance, you must obtain it. |
| Syndel warrants only that its products will
meet its specifications. There is no warranty of merchantability of fitness
for use, nor any other express or implied warranties. The user's exclusive
remedy and Syndel’s sole liability is limited to refund of the purchase
price or replacement of any product shown to be otherwise than as warranted.
Syndel will not be liable for incidental or consequential damages of any
kind. |
| Suggestions of uses should not be taken as
inducements to infringe any patents. |
Some elements of this
website require Java to be enabled